| The principle of air mattress fluctuation |
The mattress itself has two chambers, with a single trachea using a single chamber. Dual air pipes use dual chambers. Using another chamber, the air mattress works continuously through an air pump for a long time to inflate and exhaust, achieving a fluctuating effect. Two chambers circulate for exhaust and inflation. When a single chamber is deflated, the air pump will automatically change air after a few minutes, becoming a double chamber deflated, and the single chamber is full, constantly changing the area of force on the human body.
| Detailed craftsmanship display |
Independent airbags
The airway can be removed separately, and if damaged, it can be easily replaced
Seamless design
Seamless hot press sealing, embedded joints, good sealing performance
Circulatory airway
Alternating ventilation to achieve fluctuating contact with the skin, effectively preventing the growth of pressure ulcers
Silicone nozzle connector
Long service life, clean and hygienic, strong sealing performance
Concealed airbag
Can be disassembled separately for easy cleaning and easy replacement
Instructions for use
1. Lay the air mattress flat on the bed (there should be no foreign objects on the surface of the bed to prevent the air mattress from being damaged). The air inlet should be located on the patient's feet;
2. Take out the air pump and place it on the desktop or at a height of 20cm above the ground. Connect the power supply, turn on the adjustment knob clockwise, and the green indicator light will light up. Turn the knob clockwise to the maximum working state, and gas will be discharged from the air outlet; 3. Connect one end of the blue air duct of the small packaging bag to the right air outlet of the air pump, and the other end to the air intake nozzle of the air mattress
Above, there should be no air leakage;
4. After 15-20 minutes of inflation, the pressure inside the gas bed tube can reach normal usage status;
5. Release the buttons on both sides during urination and defecation, open the small air cushion at the toilet hole for convenient use. 6. When quick deflation is needed, stop the inflation pump and unplug the air duct;
8. Turn on the power supply of the inflation pump, turn on the power switch, set the adjustment knob counterclockwise to sleep mode, and the two air outlets of the air pump will have gas discharged. The air mattress will stop fluctuating and remain stationary.
Maintenance of air cushion:
(1) Surface cleaning: Regularly clean the surface with neutral detergent to avoid contact with acids and alkalis.
(2) When not in use, the gas inside the cushion should be emptied, the bottom and chamber should be cleaned, folded and placed in the original packaging box. It should be stored in a dry, well ventilated room with an ambient temperature of -20 ° C to+55 ° C, relative humidity not exceeding 90%, and free of corrosive substances. Long periods of strong sunlight exposure should be avoided to slow down the aging rate of the cushion.
(3) Disinfection: The sheets or covers used by infectious patients should be washed with a disinfectant laundry solution containing 500mg/L chlorine dioxide for at least 30 minutes, then rinsed with clean water and dried for later use.
Audited Supplier 
){kind=link}
){kind=link}